Carried & Installed
Resideo and Honeywell Home alarm panels · Kansas City.
IntegrateIT carries, supplies and installs Resideo security systems, the panels most people know as Honeywell, across the Kansas City metro. Resideo is a line we carry and install under distribution. We put in new ProSeries and VISTA systems, and we take over Honeywell panels that came with a house, test them and put them on monitoring you control. The first step is a no-cost on-site assessment. Phone: (913) 804-7575.
What Resideo and Honeywell Home are
Resideo makes the professional security products that carry the Honeywell Home and First Alert names. Its catalogue covers all-in-one panels, motion and sound detectors, sensors, doorbells and cameras. The families on Resideo’s professional security page today:
- ProSeries. Resideo’s ProSeries security and life safety line, the current all-in-one panels and the sensors that go with them.
- VISTA and VISTA H3. The VISTA family, including VISTAH hybrid security and the VISTA H3 series. Many of the older Honeywell systems we are asked to take over are VISTA panels.
- Communicators. The cellular and network modules that carry alarm signals off the panel.
- AlarmNet and Resideo Connect. AlarmNet and AlarmNet 360 are Resideo’s alarm communication service; Resideo Connect is the app Resideo lists for its systems.
Where we use Resideo
A new ProSeries panel fits a house that needs intrusion, smoke and carbon monoxide detection on one system, as part of our alarm installation service. The bigger share of Honeywell work in the metro is existing VISTA systems: panels that still work and only need new codes, a new communicator and an account. We also install Paradox and Qolsys panels, and the choice comes from what is already in the walls.
Taking over a Honeywell system already on the wall
Many houses in the metro come with a panel the new owner did not choose and a monitoring account nobody can find. That is a security system takeover, and it is often cheaper than starting again. With a VISTA panel the wiring is often sound and the work is the keypad, the communicator and the account.
- Inventory. We list every sensor, keypad, siren and communicator, test each one, and note which are wired and which are wireless.
- Codes and access. We work out with you how to reach the installer and master codes. Some panels need a reset to defaults, and we say so before touching anything.
- Monitoring. We move the account to monitoring you control, with the communicator and app the panel supports.
- Reuse or replace. We tell you which sensors are worth keeping and which have reached the end of their life, in writing.
What Resideo pairs with
Cameras go on a separate recorder, usually UniFi Protect from Ubiquiti. Where the house runs Control4 or Crestron, we connect the panel so the keypad can show its status and arm it from a scene, where the panel and its interface support that. Monitoring can run through Alarm.com or Resideo’s own service, depending on the communicator.
How we supply and install Resideo
Start with the no-cost on-site assessment: every door, window and floor, where the panel sits, and what is already installed. Then a written proposal. New systems are ordered to the plan and installed with every zone named and tested; takeovers start with the inventory above. Call (913) 804-7575.
Questions
Common questions
Do you install Honeywell alarm systems in Kansas City?
Yes. IntegrateIT (Overland Park, KS) carries and installs Resideo security, sold as Honeywell Home, across the Kansas City metro, and takes over existing Honeywell panels. Resideo is a line we carry and install under distribution. Phone: (913) 804-7575.
Can you take over the Honeywell alarm that came with my house?
Usually, yes. We inventory and test the panel and every sensor, work out access to the codes, replace the communicator if it needs it, and move the system to monitoring you control. If a panel has to be reset or replaced, we tell you before we start.
Can a Honeywell panel work with a Control4 system?
Often, yes, through an interface module on the panel. We check the panel model and what the interface supports first, then program arming and status into the Control4 or Crestron system.
Can you install a Honeywell Home product I already bought?
Usually, yes, if it is compatible with the panel it will join. We check that first, then install and test it. Our five-year workmanship warranty covers our installation; the product warranty is Resideo’s to state.
Tell us what is on the wall. We will tell you what it takes to make it yours.
Book an on-site assessment (913) 804-7575
Or read about alarm installation · security system takeover · monitoring · what a security system costs
Begin
Tell us about your home.
We walk the rooms, learn how you live, and come back with one fixed price — not a range by email.