Carried & Installed
Golfzon golf simulators · Kansas City.
IntegrateIT carries, supplies and installs Golfzon golf simulators across the Kansas City metro, from basements in Overland Park and Leawood to garages and outbuildings on the Missouri side. Golfzon is a line we carry and install under distribution. The work we do is the part a simulator box does not cover: checking that the room fits, building the bay, running power and data, mounting the projector and wiring the room into the rest of the house. The first step is a no-cost room review. Phone: (913) 804-7575.
What Golfzon is known for
Golfzon makes indoor golf simulators for homes, golf clubhouses, entertainment venues and training facilities. These are the systems named on Golfzon’s own site today:
- TwoVisionNX. Golfzon’s flagship. Golfzon lists dual high-speed camera sensors, an advanced moving plate system, multi-surface hitting mats, a built-in auto-tee and graphics built on Unreal Engine 5.
- TwoVisionNX Standard. The same camera sensors, mats and network play without the moving floor or the auto-tee, which makes it the simpler build in a room that will not take a plate.
- GDR MAX. A training system for coaches, fitters and players, with ball, club and body data, swing replays and weight-sensor analysis.
Where we use Golfzon
A Golfzon system fits a dedicated golf room, a basement bay or a commercial simulator bay. The moving plate is the deciding detail: it needs floor depth and a structure that can take it, so we settle it on the drawing before anything is ordered. A TwoVisionNX Standard suits a room where the floor cannot be built up. Either way the build belongs to our golf simulator installation service, the same process we follow for Trackman and Uneekor rooms.
What we check before we order
- Height. The ceiling over the hitting position, measured with a full swing in mind, and the height the projector has to hang at to stay out of the shot.
- Depth and width. The distance from the ball to the screen and the room either side of the player, so a club never meets a wall.
- Power, data and heat. A dedicated circuit, a wired network drop for the PC, and somewhere for the heat from the PC and projector to go.
- The floor. Whether the slab or framing can take the TwoVisionNX moving plate, or whether the Standard is the right call.
We write these down on the room review, so the proposal for the Golfzon system is built on measurements, not guesses.
What Golfzon pairs with in our rooms
The simulator is one part of the room. Around it we add the enclosure or screen wall, often a Carl’s Place enclosure, a short-throw projector sized to the screen, speakers for the course sound, lighting that dims when a round starts, and a Control4 or Crestron keypad by the door that turns the whole bay on and off. The network gets a wired drop for the simulator PC so online play does not ride on Wi-Fi.
How we supply and install Golfzon
It starts with a no-cost room review: ceiling height, width, depth from the hitting position to the screen, the floor, and where the projector can hang. Then a drawing and a written proposal. We order the system to the plan rather than stock it, frame or fit the bay, run the cable at rough-in, install and align the sensors and projector, and hand over a room that turns on from one button. Call (913) 804-7575 to set up the review.
See also: which golf simulator software you need.
Questions
Common questions
Do you install Golfzon simulators in Kansas City?
Yes. IntegrateIT (Overland Park, KS) carries and installs Golfzon across the Kansas City metro on both sides of the state line. Golfzon is a line we carry and install under distribution. We review the room at no cost, draw the bay, supply the system, install it and hand it over working. Phone: (913) 804-7575.
Can a Golfzon room be run from a Control4 system?
The simulator runs on its own software. What Control4 adds is the room around it: one button that wakes the projector, sets the lights and starts the audio, and another that shuts it all down. We program that on Control4 or Crestron as part of the build.
Can you install a Golfzon system I already bought?
Usually, yes. We check the room against the system first, since the moving plate in particular needs depth and structure, and then install and align it. Our five-year workmanship warranty covers our installation; the hardware warranty is Golfzon’s to state.
Does my room need to be built up for the TwoVisionNX moving plate?
Often it does, because the plate moves the hitting surface and sits in the floor. We measure the floor depth and the structure on the room review and tell you plainly whether the TwoVisionNX or the TwoVisionNX Standard suits the room.
Tell us the room. We will tell you which Golfzon system it can take.
Book a room review (913) 804-7575
Or read about golf simulator installation · commercial golf bays · what a simulator costs · acoustic treatment
Begin
Tell us about your home.
We walk the rooms, learn how you live, and come back with one fixed price — not a range by email.