Carried & Installed
Anthem receivers and processors · Kansas City.
IntegrateIT carries, supplies and installs Anthem receivers, processors and amplifiers across the Kansas City metro, in home theaters, media rooms and whole-house audio systems. Anthem is a line we carry and install under distribution. We size the electronics to the speakers and the room, rack them, wire them and calibrate them in the room once the furniture is in. The first step is a no-cost planning consultation. Phone: (913) 804-7575.
What Anthem is known for
Anthem is a Canadian maker of home theater and audio electronics, and Anthem Room Correction is its own measurement and correction system. Its site describes the company as proudly independent. The families on Anthem’s site today:
- A/V receivers and processors. The MRX Series receivers, including the MRX SLM, and the AVM 90 processor for rooms that use separate amplifiers.
- Amplifiers. Power, integrated and pre-amplifiers, including the STR models and the Statement P Series and M Series, which Anthem marks as made in Canada.
- Multi-room amplifiers. The MDX-8, MDX-12 and MDX-16, for whole-house audio from one rack.
- Anthem Room Correction. ARC Genesis, the software that measures the speakers in the room and corrects for it.
Where we use Anthem
An MRX receiver suits a media room or a first theater. An AVM 90 with separate amplifiers suits a dedicated theater, including a Dolby Atmos room with many channels. The MDX amplifiers drive whole-house audio zones. Anthem often pairs with Paradigm speakers; Paradigm’s own site points to Anthem’s room correction.
What we check before we order
- Channel count. Every speaker and subwoofer in the room is counted first, with headroom for the next one.
- Rack space and heat. Where the equipment lives, how it is ventilated and how it is powered and protected.
- Network. A wired connection for streaming, updates and control, rather than Wi-Fi in a closed cabinet.
- Control. How the system will be turned on and switched: a Control4 or Crestron remote, a keypad or an app.
The Anthem model in the proposal is chosen after those four are written down.
What Anthem pairs with in our rooms
Speakers from Paradigm, PSB or Klipsch, a projector or TV, sources such as Apple TV, and a Control4 or Crestron system that turns the room on and sets the volume from one remote. For a larger theater we also compare StormAudio and Marantz.
How we supply and install Anthem
After the no-cost planning consultation we draw the speaker layout and the rack, order to the plan, wire and rack the equipment, then run Anthem Room Correction with the furniture in place and record the settings with the project. Call (913) 804-7575.
After the install
Every Anthem job ends with a handover in the room: we show you how it works, test it with you, and record the models, settings and wiring in your project record so the next visit starts from facts rather than guesses. If something stops working, you call us, and the person who answers can see what was installed. Our installation carries a five-year workmanship warranty from the final invoice. Because we also look after the network and the control system around it, the electronics is never fixed in isolation from the rest of the house.
Questions
Common questions
Do you install Anthem receivers in Kansas City?
Yes. IntegrateIT (Overland Park, KS) carries and installs Anthem across the Kansas City metro, in theaters, media rooms and whole-house systems. Anthem is a line we carry and install under distribution. We plan it at no cost, supply it, install it and hand it over working. Phone: (913) 804-7575.
Can you add an Anthem receiver to a Control4 system?
Yes, in most rooms. We connect the Anthem receiver or processor to Control4 or Crestron so the room turns on, switches sources and sets the volume from one remote, and we confirm the control method for the exact model first.
Can you install a Anthem product I already bought?
Usually, yes. We check it against the speakers and the room first, then rack, wire and calibrate it. Our five-year workmanship warranty covers our installation; the product warranty is Anthem’s to state.
What does Anthem Room Correction do?
It measures the speakers in your room with a microphone and corrects the response the room causes. It cannot fix a speaker in the wrong place, so we place the speakers first and run the correction after the furniture is in.
Tell us the room and the speakers. The electronics follow.
Book a planning consultation (913) 804-7575
Or read about home theater · Dolby Atmos · calibration · whole-house audio
Begin
Tell us about your home.
We walk the rooms, learn how you live, and come back with one fixed price — not a range by email.