Raymore · Cass County growth
Raymore · new construction, automated from framing.
IntegrateIT is a home automation and low-voltage integrator serving Raymore, Missouri, around thirty minutes southeast of the design center at 15108 Glenwood Ave, Overland Park. So many houses here are still being framed, which is when a theater, distributed audio and a proper equipment room are just cable and a reserved closet. Pre-wire with the builder, lighting control, a rack in the mechanical room. Control4 Platinum Dealer, Crestron Elite Partner, Lutron Certified Dealer, CEDIA member, HTA Certified. Five-year workmanship warranty. (913) 804-7575.
Cass County's growth arrived in Raymore, and it shows in how new the housing is. Most of the city was built out from the nineteen-nineties forward, on rolling ground south of Kansas City, with two-story plans, full and walkout basements, and subdivisions still going in on the south and west sides. The construction is consistent stick framing, which is good news for anyone wanting real in-wall work. Raymore is around thirty minutes southeast of our Overland Park design center, close enough that we work it as normal territory.
Installing in Raymore
What is different about Raymore houses
Installing in Raymore is different because so many houses are still being framed. That is the moment when a theater, a distributed audio system and a proper equipment room are inexpensive, because they are just cable and a reserved closet rather than demolition. We coordinate with the builder to place speaker runs, get conduit to the attic, and put power and cooling where the rack will live. Homeowners who plan at framing get a system that looks like it came with the house.
Rolling terrain means a lot of walkout basements, and those rooms need a decision made early. A daylight lower level with a glass wall is a wonderful family space and a poor theater unless the light is controlled with automated shades. The clean answer in a lot of Raymore floor plans is to keep the walkout bright and build the dedicated theater on the interior side, where there is no daylight to fight and the mechanical room is already close by.
Basements here also come with sump pumps and mechanical equipment, which affects where the rack goes and what protects it. We keep equipment off the floor and away from the sump, give it ventilation, and put it on protected power with surge suppression sized for the service. On a newer house the panel is usually good, but subdivisions on the edge of a growing grid still see sags and spikes. Protection is cheap compared to a controller and an amplifier.
The kind of work we do in Raymore
- 01
Pre-wire and structured cabling placed with the builder at the framing stage
- 02
A whole-home control and lighting package on a new build with a walkout lower level
- 03
Distributed audio and a network backbone with the rack built into a mechanical room
What we install in Raymore
The full integration stack — designed to disappear.
Before you call anyone in Raymore
We wrote down the parts most people learn the expensive way.
How to choose a home automation company
The questions worth asking before you sign with anyone — including us. What a dealer tier actually buys you, and what happens in year four.
Read it
Lutron HomeWorks vs Control4 lighting
Written by a dealer authorized for both. Which one fits depends on the house rather than the budget — here is the framework.
Read it
Why your Wi-Fi keeps dropping
A "the smart home stopped working" call frequently traces back to the network. The diagnosis, before you call anyone.
Read it
Questions from Raymore homeowners
When in the build should I call about a new Raymore house?
- Before framing if you can, and certainly before insulation. That window is when speaker runs, conduit to the attic, an equipment closet and power for the rack can be placed for the cost of the cable. Once drywall is up, the same capability means opening walls. If your builder offers a low-voltage package, we will review it at no cost and tell you what it covers.
Walkout or interior basement for a theater?
- Interior, in most Raymore floor plans. A walkout gives you a glass wall pointed at the yard, which is lovely to live in and hard to darken. Keeping the walkout as a bright family room with a large display, and building the dedicated theater on the interior side where there is no daylight, usually gets you a better version of both rooms for the same money.
Where should the equipment rack go in a new basement?
- In or beside the mechanical room, off the floor, away from the sump, with ventilation and its own protected power. Central placement keeps cable runs short, which matters for video distribution. We ask the builder to reserve that space during framing along with a conduit path to the attic. Racks that end up in a hall closet as an afterthought are the ones that overheat and get hard to service.
How far is Raymore from your office?
- About half an hour southeast of our showroom and design center on Glenwood Avenue in south Overland Park. That puts Raymore in our normal weekly territory rather than on a trip schedule. Site walks are no cost, and Daniel walks the project himself before anything is designed. Support on systems we install continues for as long as you own the house.
We also serve
- Belton
- Peculiar
- Lee's Summit
- Grandview
- Pleasant Hill
- Harrisonville
Raymore consultation
Tell us about your Raymore project.
Consultations are by appointment. We'll spend an hour walking through your space, talking about how you live, and sketching what's possible — at no cost, no pitch.