How fast can you get to an Overland Park house for service?

Our office, showroom and design center are on Glenwood Avenue in south Overland Park, so most homes here are a short drive. Service calls in the city are usually scheduled inside the same week during business hours, and many issues are resolved remotely before anyone drives out. We support systems we installed for as long as you own them, and we also adopt systems another integrator left behind.

Can you retrofit a nineteen-eighties Overland Park house without tearing up walls?

Usually, yes. Older Overland Park homes are stick-framed with accessible basements and attics, which gives us two clean paths for cable. We combine real in-wall runs where the framing cooperates with wireless Lutron lighting where it does not, then patch and paint what we open. The site walk maps the framing, the soffits and the mechanical chases first, so the plan is specific to your house rather than a guess.

Is my lower level a good theater room?

Most Overland Park basements are. Concrete on three sides, no daylight to control and a flat ceiling give us a predictable acoustic starting point. What we check on the walk is height under the ductwork, the beam locations, and how far the seating can sit from the screen. Those three numbers decide whether the room takes a projector and a proper Atmos layout or a large direct-view display.

Do you work with Overland Park builders during construction?

Yes. New-construction low voltage is one trade for us: structured wiring, AV pre-wire, alarm rough-in and lighting feeds coordinated on the builder's schedule. We prefer to be in the drawings before framing so chases and equipment space get reserved instead of found later. If the house is already framed, we can still get in ahead of insulation, but the options narrow quickly after drywall.

Overland Park · Home base

Home automation in Overland Park · from a showroom and design center on Glenwood.

IntegrateIT installs home automation in Overland Park, Kansas, from its own showroom and design center at 15108 Glenwood Ave. For an Overland Park house that means the people who design your system are minutes away, so a site walk or a service call is a short drive rather than a scheduled trip. Control4 Platinum Dealer with a Control4 Certified Showroom, Crestron Elite Partner, Lutron Certified Dealer, CEDIA member and HTA Certified, founded in 2021 by Daniel and Moran Alon. Homes and businesses, new construction and retrofit — structured wiring, automation, lighting, theater, networking, surveillance and commercial AV as one trade. Five-year workmanship warranty. Call (913) 804-7575.

The design center sits on Glenwood Avenue in south Overland Park, which means this is the one city where our drive time is measured in minutes. Overland Park spans about fifty years of Johnson County building, from the ranch and split-level neighborhoods north of College Boulevard to the Blue Valley custom homes still going up south of 159th. Most of the houses here are stick-framed with deep, dry basements, so retrofit is realistic and lower-level theaters are the default. Daniel walks every one of these before a wire is pulled.

Start a conversation Plan a site walk

Installing in Overland Park

What is different about Overland Park houses

Installing in Overland Park is different because the housing stock forks. North of I-435 you are usually working in a home built in the seventies or eighties: eight-foot ceilings, small closets, a furnace room already crowded, and cable runs that were an afterthought. South of 135th you are more often in a house from the last fifteen years with conduit stubs and a structured panel someone half-finished. The same Control4 system lands very differently in those two homes, and the site walk exists to tell them apart before anything is quoted.

The basement is the quiet advantage in this city. Overland Park builds deep foundations, and a finished lower level gives you a light-controlled room with a concrete floor and no window wall to fight, which is the ideal shape for a dedicated theater. It also gives the rack a home that is cool, central and reachable without a ladder. When a homeowner asks where the equipment goes, the answer here is almost always a mechanical room downstairs rather than a hall closet upstairs.

Because we are headquartered here, the service relationship works differently than it does forty minutes out. A dead amplifier or a Control4 driver that stopped talking to a thermostat is a same-week problem, not a scheduled trip. That changes what we are willing to design. Systems in Overland Park can carry more subsystems and deeper programming because we can stand in the room quickly if something needs a hand. The five-year workmanship warranty is easier to honor in your own back yard.

The kind of work we do in Overland Park

01
A Control4 update in Overland Park, bringing an older controller and its drivers back onto current software
02
A network build in Overland Park, with structured cabling and a separate lane for smart devices
03
An outdoor TV in Overland Park, plus a residence audio project and a residential security install

Completed projects in Overland Park

What we install in Overland Park

The full integration stack — designed to disappear.

Whole-home automation (Control4)Lighting control (Lutron HomeWorks)Home theater + Dolby Atmos Distributed audio (NAD, Wisdom)Networking (Ubiquiti enterprise)Security + 4K surveillance Outdoor entertainment Golf simulators (Foresight)Custom video walls

See the full service catalog

Written for Overland Park, not for the metro

One page per system, one page per street.

Each of these covers what the work actually involves in Overland Park — the housing stock, the routes a house of that age will give you, and what we have and have not built here.

Before you call anyone in Overland Park

We wrote down the parts most people learn the expensive way.

The whole journal

Questions from Overland Park homeowners

Who installs home automation in Overland Park, KS?: IntegrateIT installs home automation in Overland Park, Kansas, from its own showroom and design center at 15108 Glenwood Ave. For an Overland Park house that means the people who design your system are minutes away, so a site walk or a service call is a short drive rather than a scheduled trip.
How fast can you get to an Overland Park house for service?: Our office, showroom and design center are on Glenwood Avenue in south Overland Park, so most homes here are a short drive. Service calls in the city are usually scheduled inside the same week during business hours, and many issues are resolved remotely before anyone drives out. We support systems we installed for as long as you own them, and we also adopt systems another integrator left behind.
Can you retrofit a nineteen-eighties Overland Park house without tearing up walls?: Usually, yes. Older Overland Park homes are stick-framed with accessible basements and attics, which gives us two clean paths for cable. We combine real in-wall runs where the framing cooperates with wireless Lutron lighting where it does not, then patch and paint what we open. The site walk maps the framing, the soffits and the mechanical chases first, so the plan is specific to your house rather than a guess.
Is my lower level a good theater room?: Most Overland Park basements are. Concrete on three sides, no daylight to control and a flat ceiling give us a predictable acoustic starting point. What we check on the walk is height under the ductwork, the beam locations, and how far the seating can sit from the screen. Those three numbers decide whether the room takes a projector and a proper Atmos layout or a large direct-view display.
Do you work with Overland Park builders during construction?: Yes. New-construction low voltage is one trade for us: structured wiring, AV pre-wire, alarm rough-in and lighting feeds coordinated on the builder's schedule. We prefer to be in the drawings before framing so chases and equipment space get reserved instead of found later. If the house is already framed, we can still get in ahead of insulation, but the options narrow quickly after drywall.

We also serve

Overland Park consultation

Tell us about your Overland Park project.

Consultations are by appointment. We'll spend an hour walking through your space, talking about how you live, and sketching what's possible — at no cost, no pitch.

Book a consultation in Overland Park Send a written inquiry or call (913) 804-7575